Mercedes W13 nose and front wing detail
A collection of front wings nest outside the Mercedes garage as the team prepares its cars for action at the Austrian Grand Prix.
Mercedes W13 front wing detail
Notably the front wing endplate diveplane remains in the lower position it was mounted in Silverstone. Also note the adjuster, which is mounted in the outboard section with the intent of offering some aerodynamic service.
A closeup of the wing mirror and the various flow conditioning surfaces mounted in its vicinity to help offset any inefficiencies it might otherwise yield.
A peek inside the sidepod, as the bodywork has yet to be mounted – note the lower side impact spar is peeping out beneath the intake.
Mercedes W13 brake drum detail
As first seen at Silverstone, it appears that Mercedes has changed tack with the design of the front brake drum, switching from a closed variant to a design more intent on allowing airflow to have the capacity to move around in the void between it and the wheel rim. This will also allow for an interchange of heat between brakes and wheel rim, as was so critical for tyre management in the previous era of regulations.
Mercedes W13 brake drum detail
Another angle of the W13’s brake assembly to help highlight how the various surfaces intertwine, whilst it’s notable that the outer wall of the drum is not perpendicular either.
Red Bull Racing RB18 detail
Peeking into the Red Bull garage we’re treated to a great view of the RB18’s saddle cooler arrangement, with the cooler mounted astride the power unit and further ductwork placed around it to help manage the airflow's passage.
Red Bull Racing RB18 rear detail
We’re also able to get a look at the rear wing assembly, which uses a single central mounting pillar with an exhaust surround mounted to the top of the crash structure. Also note the shape of the endplate, as it has a wider section at the top, around the wing elements, before tapering down towards the floor.
Red Bull Racing RB18 brake drum detail
The RB18 is prepared with the closed brake drum assemblies both front and rear.
A floor is carried into the garage by the Mercedes mechanics as it prepares the cars for action.
The floor has several points upon it where internal stays can be mounted, both centrally (circled) and in-line with the gearbox/crash structure just rearward of this too.
Ferrari F1-75 brake drum detail
Without the brake drum attached we can see some of the pipework and channels being used to maneuver airflow to certain parts of the assembly.
Ferrari F1-75 brake drum detail
A look at the rear brake assembly during construction, which also highlights the design of the inboard winglets.
McLaren MCL36 brake drum detail
McLaren’s internal brake shroud solution is used to help manage temperatures and reduce the airflow’s migration.
A closeup of the MCL36’s bulkhead, including the brake reservoirs, steering assembly and some inboard suspension elements.
An overview of the MCL36’s rear end, including the high-shouldered central cooling outlet, spoon-shaped rear wing and the internal detail of the pipework that delivers cool air to the brake caliper.
Under the Alpine A522’s nose vanity panel we find the internal crash structure and the printer ribbon cable-like ducting that feeds the driver cooling pipework.
A great shot of the Alpine floor and the strakes that are arranged on the leading edge of the tunnel.
Under the Alpine A522’s chassis we can see the scythe-shaped metal stay used to bridge the gap to the bib.
Alpine A522 brake drum detail
Alpine uses a long but narrow inlet to collect airflow to cool the brakes. The placement of the mechanic’s hand in this photo also shows that the forward section of the end fence has a gap between it and the inlet to allow airflow captured between the sidewall of the tyre and it a route to take.
Alpine A522 brake drum detail
Inside the brake drum bodywork a surround is used for the caliper, which in Alpine’s case is housed at 3 o’clock and has teardrop-shaped outlets to allow airflow to travel through the assembly.
AlphaTauri AT03 brake drum detail
AlphaTauri’s front brake assembly without the drum attached gives us an idea of how the airflow is moved to the various components within. Also note the tape used to block off some of the inlet to reduce the airflow’s passage.
AlphaTauri AT03 brake drum detail
The view from the other side of the AT03’s front brake assembly shows the brake disc fairing and the pipework that’s delivering cool air to the rest of the components.
Aston Martin AMR22 brake drum detail
Early in the assembly stage we get a great view of the skeleton-style brake caliper on the Aston Martin AMR22. Like Alpine, the caliper is mounted in the 3 o’clock position and has holes in the caliper to allow for airflow to travel through it, along with the teardrop-shaped holes in the caliper cover.
Aston Martin AMR22 brake drum detail
In contrast the rear caliper is mounted at 6 o’clock but there’s still a concerted effort to deal with cooling.
Alfa Romeo Racing C42 rear detail
The spoon-shaped rear wing employed on the Alfa Romeo C42 which utilises two swan-neck style mounting pillars.
Alfa Romeo Racing C42 brake drum detail
The C42’s front brake components, including the disc, are exposed in this shot prior to the rest of the brake disc fairing being installed.
Alfa Romeo Racing C42 front wing detail
Top-down overview of the C42’s front wing – note how the slot gap separators are angled according to the airflow’s local direction.
Williams’ rear wing, which features a very gentle curvature to the mainplane and utilises a single central mounting pillar.
F1 Austrian Grand Prix qualifying – Start time, how to watch, channel
Leclerc: Divided Ferrari F1 suggestions "untrue" amid Binotto Monaco talks
Why brake dust has become a bigger F1 driver problem in 2022
The F1 wing changes helping Alpine target Mercedes
How Williams accommodated its switch in design F1 concept
Alpine traces causes of F1 recent reliability woes
The Alpine Formula 1 team has traced the causes of the reliability woes that have impacted its drivers over the last two Grand Prix weekends.
Horner expects 'quick Mercedes' at F1's French Grand Prix
Red Bull Formula 1 team boss Christian Horner believes Mercedes will be in the hunt at the upcoming French Grand Prix following several stronger showings in recent races.
Stroll attracts new Saudi Arabian investment to Aston Martin
Aston Martin is set to be boosted by new investment from Saudi Arabia’s sovereign wealth fund in what executive chairman Lawrence Stroll calls a “game changing event.”
Zhou crash triggers stricter F1 roll hoop tests for 2023
The FIA has announced there will be stricter requirements for roll hoops on Formula 1 cars from 2023, following Zhou Guanyu's accident at the British Grand Prix.
The Saturday morning tricks that expose Alonso's true mindset
They were unnoticed by many, and eventually rendered futile due to a car problem that prevented him from starting the sprint race. But Fernando Alonso's tactics in second practice at the Austrian Grand Prix revealed that the Alpine driver is as sharp as he ever has been and wasting no opportunity to gain an advantage, which will play to his favour when his recent run of poor luck turns
The elements of Leclerc’s Austria win that bode well for his F1 future
OPINION: By winning at the Red Bull Ring last weekend, Charles Leclerc ended a 19-year victory drought for Ferrari in Austria. But it was the manner of his triumph over Max Verstappen that Formula 1 fans should savour now and recall later. Here’s why.
Austrian Grand Prix Driver Ratings 2022
The return of Formula 1's sprint race format at the Austrian Grand Prix provided drivers with two bites at the cherry to make progress after qualifying. And while some grasped the opportunity with both hands, several drivers were hamstrung by ill-timed errors
How Leclerc beat Verstappen in Red Bull F1’s backyard
Charles Leclerc had to give second best to Max Verstappen in qualifying at the Red Bull Ring and then followed him home in Saturday's sprint race. But the Ferrari ace remained hopeful of turning the tables on Sunday and delivered in confident fashion with three on-track passes on the reigning world champion. Here's how Leclerc secured a morale-boosting win after a run of difficult results
The key considerations Ricciardo must weigh up ahead of a crucial chapter
OPINION: He may be going through a tough time at McLaren, but Daniel Ricciardo always seems to have a smile on his face. BEN EDWARDS thinks that positive attitude will benefit the Australian when, eventually, his Formula 1 career comes to an end.
Why Ferrari can take it to the wire in Austrian GP
Squabbling between Charles Leclerc and Carlos Sainz allowed Max Verstappen to convert first position in qualifying to an untroubled victory in the Austrian Grand Prix sprint race. But for all of the Red Bull driver's dominance over 23 laps, Ferrari can take heart from the F1-75's long-run pace, which could lend Sunday's race over a much longer duration a very different look.
The inconvenient questions posed by Vettel’s Williams run
Sebastian Vettel's demo laps on board his own Williams FW14B were not only a great spectacle for the fans, but were carried out with a fully sustainable, carbon-neutral fuel. And it begs the question - for all of the money F1 has spent on championing hybrids and electric components, could it go back to V8s or V10s with a similar kind of fuel?
The combination behind the Silverstone battles that showed "F1 at its best"
OPINION: The late battling in the British Grand Prix wowed Formula 1 fans and surely represents the best racing action of the season so far. And there was a cocktail of factors that created the action, from which Carlos Sainz emerged as a popular new winner.